I put the final layer of epoxy on the canoe today. Anna followed along behind with a jenny brush to tip off any excess to give it a nice smooth finish (hopefully).
I find epoxy a bit intimidating; there are so many potential hazards in covering large areas of wood in strong adhesive. Like steaming, it’s very difficult to back out once you’ve started, so you have to try to control the feeling of blind panic. There are so many things that can go wrong with epoxy; too much hardener and the mixture heats up, and the ice cream carton you’ve mixed it in starts melting. Not enough hardener and the epoxy might not set properly; then it’s going to be messy getting it off and starting again. Then there are the environmental concerns. The epoxy resin can bears surely the most bleak of all the hazard symbols: the dead fish, tree and oil slick that indicates an environmental hazard. But only in its uncured form, we are assured. The hardener, in its own separate can, is corrosive and would probably also kill its share of fish and trees if it got out on its own. But nothing else quite compares to it for strength and water resistance, which is why it is found in many industrial and marine applications. It seems to be early days for green alternatives and I haven’t seen any evidence of their use in boat building applications. I’ve got through a gallon of epoxy make the canoe and it doesn’t come cheap, but it’s a ubiquitous material in modern boat building. I’ve used it for gluing planks and other joints together, forming the backbone, filleting and bonding fibreglass and filling holes. But for now I can put it away and stop worrying about it.